The air jack, a powerful tool, is powered by compressed air and easily shines in car repair, construction, and emergency rescue. For it to serve us safely and for a long time to come, regular care and maintenance are the keys to success. Below, let's learn how to properly maintain the air jack and the crucial things to pay attention to in the course.

1. Daily inspection

Appearance examination: Before starting the jack, be sure to carefully inspect its appearance to ensure that there is no visible damage, cracks, or deformation. Pay special attention to the airbag, connecting parts, and air pipes, which must remain intact.

Leakage examination: Check the various connection points, airbags, and valves of the jack for gas leaks. You can use soapy water to apply to the connection and observe whether there are bubbles to determine whether there is a leak.

2. Cleaning and maintenance

Surface cleaning: Use a soft cloth or brush to readily remove dust and dirt from the surface of the jack. Remember to avoid using highly corrosive detergents to protect this powerful little tool.

Maintain the airbag: wipe it regularly with a damp cloth to keep it in the best condition. Once signs of wear or aging are discovered, replace it immediately to ensure that the jack performance is not affected and the life is longer.

3. Lubrication and maintenance

Lubricant addition: The mechanical parts of the air jack need to be lubricated regularly, especially the joints and moving parts. Use the lubricant recommended by the manufacturer and add it according to the frequency in the manual.

Pneumatic system lubrication: Lubrication in the pneumatic system is the key to ensuring the regular operation of the jack. A pneumatic triplex (including an oil mister) can be installed at the air source end to guarantee the lubricity and dryness of the air source.

4. Air source maintenance

Air source drying: Ensure that the compressed air is dry and clean to prevent moisture from entering the pneumatic system, causing rust inside the jack or failure of pneumatic components. An air dryer can be installed at the front end of the air source.

Pressure regulation: Check whether the pressure of the compressed air is within the rated range of the jack before use. Too high or too low air pressure will affect the performance and safety of the jack.

5. Regular maintenance

Internal maintenance: Disassemble the jack regularly and check the wear of internal components, especially seals, valves, and cylinders. Parts with severe wear should be replaced in time.

Professional maintenance: Perform comprehensive professional maintenance once a year, and technical maintenance personnel will inspect and repair them to ensure that the performance indicators of the jack meet the standards.

6. Storage precautions

Storage environment: The storage environment of the air jack must be dry, ventilated, and away from corrosive gases. Direct sunlight and high temperature and high humidity environments are taboos because they will cause the equipment materials to age rapidly.

Proper placement: When storing, the jack should be placed stably on solid ground to avoid heavy objects squeezing the airbag and trachea. When not in use for a long time, it is recommended to inflate the jack slightly to maintain the shape of the airbag.

7. Precautions for use

Operation procedures: Strictly follow the instructions for use to avoid overloading. If any abnormality is discovered during use, stop the operation immediately and continue to use it after checking out the cause.

Safety protection: During use, ensure that there are no irrelevant personnel around to prevent the sudden failure of the airbag and the fall of heavy objects. Operators should wear necessary protective equipment, such as gloves and goggles.

Conclusion

Maintaining the air jack is to commit vitality and safety to the lifting operation. With just a few simple maintenance steps, regular inspection and cleaning, and professional lubrication, this indispensable tool can be renewed and improved in durability and reliability. Such maintenance is like putting solid armor on the air jack, ensuring it can play its best role when and where you need it, making every lift easy and safe. Don't underestimate these small maintenance steps, and they are the key to your air jack becoming the most reliable partner!